Tamiya Ger. Tank Destroyer Marder Iii 35248
£29.99
✅ Available within 7-10 days
🚚 Shipping from £4.99
SKU:
35248
Vendor:
Tamiya
Tamiya Ger. Tank Destroyer Marder Iii 35248
In The Summer Of 1941, Germany'S Invasion Of Russia Was Unfolding Favorably For The Wehrmacht. However, German Authorities Began To Notice The Inferiority Of Their Tanks And Anti-Tank Weaponry To Those Of The Soviet Army, Such As The T34. To Cope With This Disparity They Decided To: Improve The Pz.Kpfw.Iii And Pz.Kpfw.Iv Tanks; Develop New Tanks; And Increase Production Of The 7.5Cm Anti-Tank Cannon. Finally, As An Interim Solution, It Was Decided To Improved Captured Russian 7.62Cm Anti-Tank Cannons And Deploy Them For Wehrmacht Use. These Fearsome Cannons Could Penetrate 83Mm Armor Plating At A Range Of 1000M, But After Improvement, Could Penetrate Up To 122Mm, And Were Renamed 7.62Cm Pak36(R) Gun. Until The New Tanks Were Ready For Deployment, 7.62Cm Pak36(R) Guns Were To Be Mounted On The Chassis Of Obsolete Pz.Kpfw.Ii And Pz.Kpfw.38(T) Tanks For The Creation Of A Stopgap Tank Hunter. The 38(T) Tanks Were Based On The Ltvz.38 Tank, Which Was Developed For Use By The Czech Company Ckd (Later Bmm) For The Czech Army In 1938. In 1939, With The Annexation Of Czechoslovakia, This Tank Went Into Production For The Wehrmacht. The Base This Czech-Made Tank Was Combined With The Soviet 7.62Cm Pak36(R) Gun, Resulting In The Creation The Wehrmacht'S Fearsome Tank Hunter, The Marder Iii Sd.Kfz.139. The Turret Base Of The Pk.Kpfw.38(T) Was Removed And A 16Mm Steel Plate Was Attached In Its Place. The Soviet 7.62Cm Pak36(R) Gun Was Mounted On That Plate, 11Mm Armor Plating Installed To The Front And Sides, And Massive Stirrups Immobilized The Gun.
- 1/35 Scale Plastic Assembly Model Kit Based On The German Tank Destroyer Marder Iii.
- Overall Length: 174Mm
- Each Detail Of This Fascinating Fighting Machine Has Been Accurately Reproduced For Total Modeling Satisfaction.
- All The Details Of The Fighting Compartment (Main Gun Plate, Gun Supports, Ammunition Rack, Etc.) Have Been Precisely Recreated.
- Protective Armor And Sighting Equipment Moves With Raising And Lowering Of Main Gun.
- Crew Seats And Large Clamp For Main Gun Can Be Modeled In The Fighting Or Moving Positions.
- Two Crew Figures Are Included In Set. Five Kinds Of Battlefield Markings Are Included.
The Base This Czech-Made Tank Was Combined With The Soviet 7.62Cm Pak36(R), Resulting A Fighting Vehicle Of Considerable Height. The Base This Model Does Not Incorporate Slide-Molding Techniques, But Requires A Fascinating Assembly From Several Parts, Offering The Modeler With A Truly Pleasurable 1/35 Scale Construction
Since The Chassis Runner Is Divided By Panels, Assembly Of The Pk.Kpfw.38(T) Tank Base Offers A Deep Understanding Of The Actual Construction. Learn All The Intricacies Of The Real Marder Iii Through Assembly Of This Precise Scale Model!
Every Part Of Tamiya'S Marder Iii Has Been Recreated With Stunning Attention To Detail. The Ammunition Rack And Basket, Slanted Armor Plating, Leaf-Spring Suspension, Large Road Wheels-No Details Have Been Left Out!
The Simple Construction Of This Modified Soviet Gun Is Beautifully Illustrated On Tamiya'S Marder Iii. No Details Of The Fighting Compartment Have Been Overlooked. Also, The Sighting Equipment And Front Armor Plate Can Be Raised Or Lowered, Even After Assembly.
Free delivery over £99
Shipping charges vary based on the order value and destination. UK standard shipping costs range from £4.99 to £7.99.
Additional surcharges for heavy items and non-mainland UK destinations, including specific regions like Northern Ireland, Isle of Man, Guernsey, and Jersey. We do not ship to PO Boxes and BFPO addresses.
Access Models offers efficient delivery services within the UK and overseas, aiming to dispatch orders within... Read More
Returns are accepted within 14 days for change of mind and 30 days for faulty items.
To request a return, you can contact us at sales@accessmodels.co.uk or call us on 01636673116
Access Models offers exchange or refund for eligible returns, excluding faults due to misuse or wear and tear. Customers are responsible for return postage costs, except in cases of damage or fault. Refunds are issued in accordance with the returns... Read More
Tamiya Ger. Tank Destroyer Marder Iii 35248
In The Summer Of 1941, Germany'S Invasion Of Russia Was Unfolding Favorably For The Wehrmacht. However, German Authorities Began To Notice The Inferiority Of Their Tanks And Anti-Tank Weaponry To Those Of The Soviet Army, Such As The T34. To Cope With This Disparity They Decided To: Improve The Pz.Kpfw.Iii And Pz.Kpfw.Iv Tanks; Develop New Tanks; And Increase Production Of The 7.5Cm Anti-Tank Cannon. Finally, As An Interim Solution, It Was Decided To Improved Captured Russian 7.62Cm Anti-Tank Cannons And Deploy Them For Wehrmacht Use. These Fearsome Cannons Could Penetrate 83Mm Armor Plating At A Range Of 1000M, But After Improvement, Could Penetrate Up To 122Mm, And Were Renamed 7.62Cm Pak36(R) Gun. Until The New Tanks Were Ready For Deployment, 7.62Cm Pak36(R) Guns Were To Be Mounted On The Chassis Of Obsolete Pz.Kpfw.Ii And Pz.Kpfw.38(T) Tanks For The Creation Of A Stopgap Tank Hunter. The 38(T) Tanks Were Based On The Ltvz.38 Tank, Which Was Developed For Use By The Czech Company Ckd (Later Bmm) For The Czech Army In 1938. In 1939, With The Annexation Of Czechoslovakia, This Tank Went Into Production For The Wehrmacht. The Base This Czech-Made Tank Was Combined With The Soviet 7.62Cm Pak36(R) Gun, Resulting In The Creation The Wehrmacht'S Fearsome Tank Hunter, The Marder Iii Sd.Kfz.139. The Turret Base Of The Pk.Kpfw.38(T) Was Removed And A 16Mm Steel Plate Was Attached In Its Place. The Soviet 7.62Cm Pak36(R) Gun Was Mounted On That Plate, 11Mm Armor Plating Installed To The Front And Sides, And Massive Stirrups Immobilized The Gun.
- 1/35 Scale Plastic Assembly Model Kit Based On The German Tank Destroyer Marder Iii.
- Overall Length: 174Mm
- Each Detail Of This Fascinating Fighting Machine Has Been Accurately Reproduced For Total Modeling Satisfaction.
- All The Details Of The Fighting Compartment (Main Gun Plate, Gun Supports, Ammunition Rack, Etc.) Have Been Precisely Recreated.
- Protective Armor And Sighting Equipment Moves With Raising And Lowering Of Main Gun.
- Crew Seats And Large Clamp For Main Gun Can Be Modeled In The Fighting Or Moving Positions.
- Two Crew Figures Are Included In Set. Five Kinds Of Battlefield Markings Are Included.
The Base This Czech-Made Tank Was Combined With The Soviet 7.62Cm Pak36(R), Resulting A Fighting Vehicle Of Considerable Height. The Base This Model Does Not Incorporate Slide-Molding Techniques, But Requires A Fascinating Assembly From Several Parts, Offering The Modeler With A Truly Pleasurable 1/35 Scale Construction
Since The Chassis Runner Is Divided By Panels, Assembly Of The Pk.Kpfw.38(T) Tank Base Offers A Deep Understanding Of The Actual Construction. Learn All The Intricacies Of The Real Marder Iii Through Assembly Of This Precise Scale Model!
Every Part Of Tamiya'S Marder Iii Has Been Recreated With Stunning Attention To Detail. The Ammunition Rack And Basket, Slanted Armor Plating, Leaf-Spring Suspension, Large Road Wheels-No Details Have Been Left Out!
The Simple Construction Of This Modified Soviet Gun Is Beautifully Illustrated On Tamiya'S Marder Iii. No Details Of The Fighting Compartment Have Been Overlooked. Also, The Sighting Equipment And Front Armor Plate Can Be Raised Or Lowered, Even After Assembly.
Free delivery over £99
Shipping charges vary based on the order value and destination. UK standard shipping costs range from £4.99 to £7.99.
Additional surcharges for heavy items and non-mainland UK destinations, including specific regions like Northern Ireland, Isle of Man, Guernsey, and Jersey. We do not ship to PO Boxes and BFPO addresses.
Access Models offers efficient delivery services within the UK and overseas, aiming to dispatch orders within 48 hours of receipt, contingent on payment confirmation. Standard UK deliveries are conducted via Royal Mail, typically arriving within 2-3 days, though customers are advised to allow up to 5 days. For expedited deliveries, the express service ensures next-day delivery for orders placed before 1pm, with specific provisions for orders placed over the weekend or on bank holidays.
Shipping charges vary based on the order value and destination. UK standard shipping costs range from £4.99 to £7.99, with additional surcharges for heavy items and non-mainland UK destinations, including specific regions like Northern Ireland, Isle of Man, Guernsey, and Jersey. We do not ship to PO Boxes and BFPO addresses.
For heavy, bulky, or restricted items such as large model kits and items containing hazardous materials, special shipping considerations apply. International shipping starts at £18, with varying costs and delivery times based on destination zones. Access Models does not ship to certain countries including Spain, USA, and Australia.
Customers may encounter customs fees on international orders, which are not included in our shipping costs and are the responsibility of the customer. In case of postal losses or damage, claims may take up to 30 days to process, and we require customer confirmation to initiate this process.
Returns are accepted within 14 days for change of mind and 30 days for faulty items, in line with the EU Distance Selling Directive. Access Models offers repair, exchange, or refund for eligible returns, excluding faults due to misuse or wear and tear. Customers are responsible for return postage costs, except in cases of damage or fault. Refunds are issued in accordance with the returns policy, excluding opened packages unless they are faulty.
Unattended Deliveries and Returns:
In the event that a customer is not available to receive their order upon any delivery attempts, and the item is consequently returned to us by the courier, it is the responsibility of the customer to cover the costs of re-posting the item.
Should your order be returned due to unavailability at the delivery address during any attempts made, we will contact you to confirm the address details and arrange for re-delivery. Please be advised that we will require payment of re-postage costs before the item is dispatched again. This fee will cover the costs associated with handling and shipping the item to you for another attempt.
We strongly encourage customers to provide a delivery address where someone will be available to accept the parcel at the time of delivery to avoid the inconvenience and additional costs associated with re-posting.
Returns are accepted within 14 days for change of mind and 30 days for faulty items.
To request a return, you can contact us at sales@accessmodels.co.uk or call us on 01636673116
Access Models offers exchange or refund for eligible returns, excluding faults due to misuse or wear and tear. Customers are responsible for return postage costs, except in cases of damage or fault. Refunds are issued in accordance with the returns policy, excluding opened packages unless they are faulty.
To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with its original packaging. You’ll also need the receipt or proof of purchase.
Damages and issues
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.
Refunds
We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method within 10 business days. Please remember it can take some time for your bank or credit card company to process and post the refund too.
If more than 15 business days have passed since we’ve approved your return, please contact us at sales@accessmodels.co.uk.