• Add description, images, menus and links to your mega menu

  • A column with no settings can be used as a spacer

  • Link to your collections, sales and even external links

  • Add up to five columns

  • CEN Racing 2024 M-Sport Ford Puma Rally1 Brushless 1/8 RTR


    🚚 Free Delivery on this item

    Notify me when this product is available:

    SKU: CEN9000
    Vendor: Cen

     

    CEN Racing’s new officially licensed 2024 M-Sport Ford Puma Rally1 Brushless 1/8 RTR is sure to be popular with worldwide rally fans. Featuring a fully detailed and beautifully decaled bodyshell, injection moulded rear wing, mirrors, side intakes, rear chassis diffuser and Pirelli P-Zero styled wheels and tyres the M-Sport is ready for your next Special Stage.

    Underneath, a new chassis design features next generation aerodynamic lower suspension arms and oil filled shock absorbers, mounted to 3mm front and rear aluminium shock towers. A 3mm aluminium chassis mounts a full time 4wd transmission with metal gears and 6-gear bevel differentials.

    Hobbywing 100A 3S LiPo rated brushless speed control and Cen Racing 3658 2900kv brushless motor provide different levels of power to suit all surfaces, while steering is controlled by a 12kg metal geared Savox servo.

    RC rally redefined with the Cen Racing M-Sport Ford Puma.

    Features

    ESC  

    • 100A WP-MAX10-SCT-100A-3S RTR Sensor-less with T-Plug (Powered by HobbyWing).
    • 2-3S Li-po (Lithium-polymer) or 6-9 Cell Ni-Mh Batteries.
    • Water-Proof and Dust-Proof for All Weather.
    • Super Internal Switch-Mode BEC with 6V / 7.4V for Usage with High Voltage Servo.
    • Built-In Capacitor Module.
    • Automatic Throttle Range Calibration.
    • Low Voltage Cut-Off Protection for Li-Po and NiMH Battery.
    • Over-Heat Protection and Throttle Signal Loss Protection.
    • 5 Levels of acceleration/punch.
    • 9 Levels of maximum brake force.

    Motor

    • CEN Racing High Performance 3658 3000KV Brushless Motor (Sensorless).

    Servo

    • 12Kg Metal Gear Servo (By Savox).
    • 4.8V - 0.26 sec/60° 10.0 kg-cm.
    • 6.0V - 0.23 sec/60° 12.0 kg-cm.
    • With 25T Horn Gear Spline.

    Radio System

    • AMP-30 TX 3-Channel Transmitter.
    • Frequencies: 2.4GHz.
    • Digital Trimming.
    • Steering Dual-Rate (ST D/R) Adjustment.
    • End Point Adjustment (EPA).
    • Build in Failsafe.
    • Power Supply: 4 - AA Alkaline (Not Included).
    • AMP30 RX 3-Channel Receiver.
    • Frequency: 2.4GHz.
    • Power Supply: DC 4.8 ~ 6.0V.
    • Dimensions: 1.35” (L) x 0.72” (W) x 0.53” (H).

    Body

    • Official Licensed 2024 M-Sport Ford Puma Rally 1 Edition
    • Fully Detailed Injection-Molded Body Accessories Body Details
    • Size: Length 20.08inches (510mm) / Width 9.45 inches (240mm)

    Chassis

    • 3mm Aluminum Chassis
    • Front and Rear 3mm Aluminium Shock Towers
    • Aluminium Arm Brace
    • Full Precision Ball Bearing Support
    • Wider Body Mount Positions for Better Support
    • Front Skid plate with Durable Foam Bumper
    • Injection-Molded Rear Diffuser
    • Easy Access Battery Tray
    • Battery Tray Size 142mm x 48mm

    Suspension

    • Aerodynamic Lower Arm Suspension Design
    • Big Bore Oil Filled Adjustable Coil Over Shocks
    • 12mm Over Size Shock Body with 3mm Hardened Steel Polished Shaft
    • Racing Spring
    • Adjustable Turnbuckles
    • Adjustable Wheelbase +/- 6mm

    Gear Ratio

    • Spur / Pinion 46/14T 3.29:1
    • Ring & Pinion 40/17T 2.35:1

    Drivetrain

    • Full Time 4-Wheels Drive
    • Center Shaft Drivetrain for more power transferred to the wheels
    • Metal Transmission Gears
    • Aluminium Adjustable Motor Mount
    • Oil Filled Two Differential Drive System      
    • Center Direct Drive
    • Hight Efficient Transmission System
    • 6 Gear Bevel Gear Type Differential
    • Front / Rear Harden Steel Dog Bone and outdrives

    Wheel

    • High Impact & Light Weight WRC Racing Wheel 56 X 35.50 mm.

    Tyres

    • High Performance Racing Rubber Compound Tyres 56 x 80 x 35.50 mm.

    Specifications

    Chassis Length: 18.11 inches (460mm)
    Chassis Width: 9.06 inches (230mm)
    Wheelbase: 11.80 inches (300mm)
    Ground Clearance: 0.98 inches (25mm)
    Weight: 5.51 lb. 2.5kg

    Required To Complete

    • Battery and charger are not included (Recommend 2S - 3S Lipo Battery).

    Free delivery over £99

    Shipping charges vary based on the order value and destination. UK standard shipping costs range from £4.99 to £7.99.

    Additional surcharges for heavy items and non-mainland UK destinations, including specific regions like Northern Ireland, Isle of Man, Guernsey, and Jersey. We do not ship to PO Boxes and BFPO addresses.

    Access Models offers efficient delivery services within the UK and overseas, aiming to dispatch orders within... Read More

    Returns are accepted within 14 days for change of mind and 30 days for faulty items.

    To request a return, you can contact us at sales@accessmodels.co.uk or call us on 01636673116

    Access Models offers exchange or refund for eligible returns, excluding faults due to misuse or wear and tear. Customers are responsible for return postage costs, except in cases of damage or fault. Refunds are issued in accordance with the returns... Read More

     

    CEN Racing’s new officially licensed 2024 M-Sport Ford Puma Rally1 Brushless 1/8 RTR is sure to be popular with worldwide rally fans. Featuring a fully detailed and beautifully decaled bodyshell, injection moulded rear wing, mirrors, side intakes, rear chassis diffuser and Pirelli P-Zero styled wheels and tyres the M-Sport is ready for your next Special Stage.

    Underneath, a new chassis design features next generation aerodynamic lower suspension arms and oil filled shock absorbers, mounted to 3mm front and rear aluminium shock towers. A 3mm aluminium chassis mounts a full time 4wd transmission with metal gears and 6-gear bevel differentials.

    Hobbywing 100A 3S LiPo rated brushless speed control and Cen Racing 3658 2900kv brushless motor provide different levels of power to suit all surfaces, while steering is controlled by a 12kg metal geared Savox servo.

    RC rally redefined with the Cen Racing M-Sport Ford Puma.

    Features

    ESC  

    • 100A WP-MAX10-SCT-100A-3S RTR Sensor-less with T-Plug (Powered by HobbyWing).
    • 2-3S Li-po (Lithium-polymer) or 6-9 Cell Ni-Mh Batteries.
    • Water-Proof and Dust-Proof for All Weather.
    • Super Internal Switch-Mode BEC with 6V / 7.4V for Usage with High Voltage Servo.
    • Built-In Capacitor Module.
    • Automatic Throttle Range Calibration.
    • Low Voltage Cut-Off Protection for Li-Po and NiMH Battery.
    • Over-Heat Protection and Throttle Signal Loss Protection.
    • 5 Levels of acceleration/punch.
    • 9 Levels of maximum brake force.

    Motor

    • CEN Racing High Performance 3658 3000KV Brushless Motor (Sensorless).

    Servo

    • 12Kg Metal Gear Servo (By Savox).
    • 4.8V - 0.26 sec/60° 10.0 kg-cm.
    • 6.0V - 0.23 sec/60° 12.0 kg-cm.
    • With 25T Horn Gear Spline.

    Radio System

    • AMP-30 TX 3-Channel Transmitter.
    • Frequencies: 2.4GHz.
    • Digital Trimming.
    • Steering Dual-Rate (ST D/R) Adjustment.
    • End Point Adjustment (EPA).
    • Build in Failsafe.
    • Power Supply: 4 - AA Alkaline (Not Included).
    • AMP30 RX 3-Channel Receiver.
    • Frequency: 2.4GHz.
    • Power Supply: DC 4.8 ~ 6.0V.
    • Dimensions: 1.35” (L) x 0.72” (W) x 0.53” (H).

    Body

    • Official Licensed 2024 M-Sport Ford Puma Rally 1 Edition
    • Fully Detailed Injection-Molded Body Accessories Body Details
    • Size: Length 20.08inches (510mm) / Width 9.45 inches (240mm)

    Chassis

    • 3mm Aluminum Chassis
    • Front and Rear 3mm Aluminium Shock Towers
    • Aluminium Arm Brace
    • Full Precision Ball Bearing Support
    • Wider Body Mount Positions for Better Support
    • Front Skid plate with Durable Foam Bumper
    • Injection-Molded Rear Diffuser
    • Easy Access Battery Tray
    • Battery Tray Size 142mm x 48mm

    Suspension

    • Aerodynamic Lower Arm Suspension Design
    • Big Bore Oil Filled Adjustable Coil Over Shocks
    • 12mm Over Size Shock Body with 3mm Hardened Steel Polished Shaft
    • Racing Spring
    • Adjustable Turnbuckles
    • Adjustable Wheelbase +/- 6mm

    Gear Ratio

    • Spur / Pinion 46/14T 3.29:1
    • Ring & Pinion 40/17T 2.35:1

    Drivetrain

    • Full Time 4-Wheels Drive
    • Center Shaft Drivetrain for more power transferred to the wheels
    • Metal Transmission Gears
    • Aluminium Adjustable Motor Mount
    • Oil Filled Two Differential Drive System      
    • Center Direct Drive
    • Hight Efficient Transmission System
    • 6 Gear Bevel Gear Type Differential
    • Front / Rear Harden Steel Dog Bone and outdrives

    Wheel

    • High Impact & Light Weight WRC Racing Wheel 56 X 35.50 mm.

    Tyres

    • High Performance Racing Rubber Compound Tyres 56 x 80 x 35.50 mm.

    Specifications

    Chassis Length: 18.11 inches (460mm)
    Chassis Width: 9.06 inches (230mm)
    Wheelbase: 11.80 inches (300mm)
    Ground Clearance: 0.98 inches (25mm)
    Weight: 5.51 lb. 2.5kg

    Required To Complete

    • Battery and charger are not included (Recommend 2S - 3S Lipo Battery).

    Free delivery over £99

    Shipping charges vary based on the order value and destination. UK standard shipping costs range from £4.99 to £7.99.

    Additional surcharges for heavy items and non-mainland UK destinations, including specific regions like Northern Ireland, Isle of Man, Guernsey, and Jersey. We do not ship to PO Boxes and BFPO addresses.

    Access Models offers efficient delivery services within the UK and overseas, aiming to dispatch orders within 48 hours of receipt, contingent on payment confirmation. Standard UK deliveries are conducted via Royal Mail, typically arriving within 2-3 days, though customers are advised to allow up to 5 days. For expedited deliveries, the express service ensures next-day delivery for orders placed before 1pm, with specific provisions for orders placed over the weekend or on bank holidays.

    Shipping charges vary based on the order value and destination. UK standard shipping costs range from £4.99 to £7.99, with additional surcharges for heavy items and non-mainland UK destinations, including specific regions like Northern Ireland, Isle of Man, Guernsey, and Jersey. We do not ship to PO Boxes and BFPO addresses.

    For heavy, bulky, or restricted items such as large model kits and items containing hazardous materials, special shipping considerations apply. International shipping starts at £18, with varying costs and delivery times based on destination zones. Access Models does not ship to certain countries including Spain, USA, and Australia.

    Customers may encounter customs fees on international orders, which are not included in our shipping costs and are the responsibility of the customer. In case of postal losses or damage, claims may take up to 30 days to process, and we require customer confirmation to initiate this process.

    Returns are accepted within 14 days for change of mind and 30 days for faulty items, in line with the EU Distance Selling Directive. Access Models offers repair, exchange, or refund for eligible returns, excluding faults due to misuse or wear and tear. Customers are responsible for return postage costs, except in cases of damage or fault. Refunds are issued in accordance with the returns policy, excluding opened packages unless they are faulty.

    Unattended Deliveries and Returns:

    In the event that a customer is not available to receive their order upon any delivery attempts, and the item is consequently returned to us by the courier, it is the responsibility of the customer to cover the costs of re-posting the item.

    Should your order be returned due to unavailability at the delivery address during any attempts made, we will contact you to confirm the address details and arrange for re-delivery. Please be advised that we will require payment of re-postage costs before the item is dispatched again. This fee will cover the costs associated with handling and shipping the item to you for another attempt.

    We strongly encourage customers to provide a delivery address where someone will be available to accept the parcel at the time of delivery to avoid the inconvenience and additional costs associated with re-posting.

    Returns are accepted within 14 days for change of mind and 30 days for faulty items.

    To request a return, you can contact us at sales@accessmodels.co.uk or call us on 01636673116

    Access Models offers exchange or refund for eligible returns, excluding faults due to misuse or wear and tear. Customers are responsible for return postage costs, except in cases of damage or fault. Refunds are issued in accordance with the returns policy, excluding opened packages unless they are faulty.

    To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with its original packaging. You’ll also need the receipt or proof of purchase.

    Please note that refunds will only cover the cost of the item(s) purchased and will not include any postage or shipping fees.

    Damages and issues
    Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.

    Refunds
    We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method within 10 business days. Please remember it can take some time for your bank or credit card company to process and post the refund too.
    If more than 15 business days have passed since we’ve approved your return, please contact us at sales@accessmodels.co.uk.