Hobbywing Xerun V10 6.5T Black G3 Motor HW30401109
£94.52
✅ In Stock at Warehouse - Dispatched in 3-5 days
✅ Available for "Click and Collect" in 3-5 days
🚚 Delivery cost from £4.99
SKU:
HW30401109
Vendor:
Hobbywing
The HobbyWing XeRun V10 G3 has been specially designed for extremely high level racing. The RMP of G3 Stock motor has been significantly improved, the KV & torque have been improved by 16% and 4% respectively compared with the V10 G2 Stock motor.
The G3 Modified & Stock motors are lightweight and only weigh 161g & 132g respectively, the weights have been reduced by 11% and 21% when compared with the previous generation G2 motors.
The built-in high precision Hall sensor combined with the high precision and balanced rotor guarantee outstanding linearity of the motor. The mechanical timing can be finely adjusted finely and the timing marks on the rear end plate of the motor guarantee the stability of the timing after adjustment. For G3 Stock motors (10.5T~25.5T), the timing is adjustable from 30 degrees to 60 degrees; for Modified motors (3.5T~8.5T), the timing is adjustable from 20 degrees to 50 degrees.
The motor can has been designed to be easy to dismantled for maintenance purposes and for the replacement of any parts that wear. The special can design allows for extra airflow around the stator core to maximize cooling and efficiency. Even more of the case has been machined from the end plates of the 10.5T~21.5T motors further help reduce heat. The end plates of 5.5T~8.5T motors are machined in a way to effectively keep sand or dirt from getting inside and damaging the motor but still allow for extra cooling.
The use of a high performance stator core, heat resistant wire(200degC), a heat resistant precision rotor (200degC), high precision and high strength bearings and copper solder tabs guarantee outstanding performance and super durability.
It’s compliant with IFMAR, ROAR, EFRA, BRCA rules, and certificated by RoHS, CE, FCC
HobbyWing XeRun V10 G3 Timing Information:
The V10 G3 motors provide a wide range of adjustable mechanical timings. For optimal performance you can change the output range and characteristic of your power system by adjusting the motor timing. For the (10.5T~25.5T) Stock motors the default timing is 40 degrees; for the (3.5T~8.5T) Modified motors the default timing is 30 degrees.
Increasing the timing can increase the motor speed (RPM), but this will also increases the motor temperature and reduce the overall efficiency. Before adjusting the motor timing your must ensure your ESC is properly programmed, higher timing usually requires a higher gear ratio too. After adjusting the timing it is best to check the temperatures of the motor to ensure that your motor overheat after running a whole battery pack.
You can get information about the motor temperature via an infra-red temperature gun, the LCD programmer or the WiFi module & smart phone (with the Hobbywing WiFi Link App installed). If the motor temperature is too high, you must let the motor cool down first then reduce the timing or increase the FDR and then test again.
HobbyWing XeRun V10 G3 Features:
- High precision hall sensor
- Specially designed for extremely high level racing
- Rebuildable Design
- High performance stator core
- Heat resistant wire
- Heat resistant precision rotor
- Compliant with IFMAR, ROAR, EFRA, BRCA
Spec Check:
- Scale: Modified 1/10th 4WD Off-road
- Brushed/Brushless: Brushless
- Sensored/Sensorless: Sensored
- Pole Count: 2
- KV Rating: 5120KV (No load)
- Turns: 6.5T
- LiPo Cells: 2S
- No-load Current(A): 3.9
- Resistance(mΩ): 0.0056
- O.D: 35.9mm
- Length: 51.2mm
- Shaft Diameter: 3.17mm
- Shaft Length: 13.3mm
- Rotor Diameter: 5-12.5
- Weight(g): 164
- Timing: 20-60 Degrees (Motor Dependant)
Free delivery over £99
Shipping charges vary based on the order value and destination. UK standard shipping costs range from £4.99 to £7.99.
Additional surcharges for heavy items and non-mainland UK destinations, including specific regions like Northern Ireland, Isle of Man, Guernsey, and Jersey. We do not ship to PO Boxes and BFPO addresses.
Access Models offers efficient delivery services within the UK and overseas, aiming to dispatch orders within... Read More
Returns are accepted within 14 days for change of mind and 30 days for faulty items.
To request a return, you can contact us at sales@accessmodels.co.uk or call us on 01636673116
Access Models offers exchange or refund for eligible returns, excluding faults due to misuse or wear and tear. Customers are responsible for return postage costs, except in cases of damage or fault. Refunds are issued in accordance with the returns... Read More
The HobbyWing XeRun V10 G3 has been specially designed for extremely high level racing. The RMP of G3 Stock motor has been significantly improved, the KV & torque have been improved by 16% and 4% respectively compared with the V10 G2 Stock motor.
The G3 Modified & Stock motors are lightweight and only weigh 161g & 132g respectively, the weights have been reduced by 11% and 21% when compared with the previous generation G2 motors.
The built-in high precision Hall sensor combined with the high precision and balanced rotor guarantee outstanding linearity of the motor. The mechanical timing can be finely adjusted finely and the timing marks on the rear end plate of the motor guarantee the stability of the timing after adjustment. For G3 Stock motors (10.5T~25.5T), the timing is adjustable from 30 degrees to 60 degrees; for Modified motors (3.5T~8.5T), the timing is adjustable from 20 degrees to 50 degrees.
The motor can has been designed to be easy to dismantled for maintenance purposes and for the replacement of any parts that wear. The special can design allows for extra airflow around the stator core to maximize cooling and efficiency. Even more of the case has been machined from the end plates of the 10.5T~21.5T motors further help reduce heat. The end plates of 5.5T~8.5T motors are machined in a way to effectively keep sand or dirt from getting inside and damaging the motor but still allow for extra cooling.
The use of a high performance stator core, heat resistant wire(200degC), a heat resistant precision rotor (200degC), high precision and high strength bearings and copper solder tabs guarantee outstanding performance and super durability.
It’s compliant with IFMAR, ROAR, EFRA, BRCA rules, and certificated by RoHS, CE, FCC
HobbyWing XeRun V10 G3 Timing Information:
The V10 G3 motors provide a wide range of adjustable mechanical timings. For optimal performance you can change the output range and characteristic of your power system by adjusting the motor timing. For the (10.5T~25.5T) Stock motors the default timing is 40 degrees; for the (3.5T~8.5T) Modified motors the default timing is 30 degrees.
Increasing the timing can increase the motor speed (RPM), but this will also increases the motor temperature and reduce the overall efficiency. Before adjusting the motor timing your must ensure your ESC is properly programmed, higher timing usually requires a higher gear ratio too. After adjusting the timing it is best to check the temperatures of the motor to ensure that your motor overheat after running a whole battery pack.
You can get information about the motor temperature via an infra-red temperature gun, the LCD programmer or the WiFi module & smart phone (with the Hobbywing WiFi Link App installed). If the motor temperature is too high, you must let the motor cool down first then reduce the timing or increase the FDR and then test again.
HobbyWing XeRun V10 G3 Features:
- High precision hall sensor
- Specially designed for extremely high level racing
- Rebuildable Design
- High performance stator core
- Heat resistant wire
- Heat resistant precision rotor
- Compliant with IFMAR, ROAR, EFRA, BRCA
Spec Check:
- Scale: Modified 1/10th 4WD Off-road
- Brushed/Brushless: Brushless
- Sensored/Sensorless: Sensored
- Pole Count: 2
- KV Rating: 5120KV (No load)
- Turns: 6.5T
- LiPo Cells: 2S
- No-load Current(A): 3.9
- Resistance(mΩ): 0.0056
- O.D: 35.9mm
- Length: 51.2mm
- Shaft Diameter: 3.17mm
- Shaft Length: 13.3mm
- Rotor Diameter: 5-12.5
- Weight(g): 164
- Timing: 20-60 Degrees (Motor Dependant)
Free delivery over £99
Shipping charges vary based on the order value and destination. UK standard shipping costs range from £4.99 to £7.99.
Additional surcharges for heavy items and non-mainland UK destinations, including specific regions like Northern Ireland, Isle of Man, Guernsey, and Jersey. We do not ship to PO Boxes and BFPO addresses.
Access Models offers efficient delivery services within the UK and overseas, aiming to dispatch orders within 48 hours of receipt, contingent on payment confirmation. Standard UK deliveries are conducted via Royal Mail, typically arriving within 2-3 days, though customers are advised to allow up to 5 days. For expedited deliveries, the express service ensures next-day delivery for orders placed before 1pm, with specific provisions for orders placed over the weekend or on bank holidays.
Shipping charges vary based on the order value and destination. UK standard shipping costs range from £4.99 to £7.99, with additional surcharges for heavy items and non-mainland UK destinations, including specific regions like Northern Ireland, Isle of Man, Guernsey, and Jersey. We do not ship to PO Boxes and BFPO addresses.
For heavy, bulky, or restricted items such as large model kits and items containing hazardous materials, special shipping considerations apply. International shipping starts at £18, with varying costs and delivery times based on destination zones. Access Models does not ship to certain countries including Spain, USA, and Australia.
Customers may encounter customs fees on international orders, which are not included in our shipping costs and are the responsibility of the customer. In case of postal losses or damage, claims may take up to 30 days to process, and we require customer confirmation to initiate this process.
Returns are accepted within 14 days for change of mind and 30 days for faulty items, in line with the EU Distance Selling Directive. Access Models offers repair, exchange, or refund for eligible returns, excluding faults due to misuse or wear and tear. Customers are responsible for return postage costs, except in cases of damage or fault. Refunds are issued in accordance with the returns policy, excluding opened packages unless they are faulty.
Unattended Deliveries and Returns:
In the event that a customer is not available to receive their order upon any delivery attempts, and the item is consequently returned to us by the courier, it is the responsibility of the customer to cover the costs of re-posting the item.
Should your order be returned due to unavailability at the delivery address during any attempts made, we will contact you to confirm the address details and arrange for re-delivery. Please be advised that we will require payment of re-postage costs before the item is dispatched again. This fee will cover the costs associated with handling and shipping the item to you for another attempt.
We strongly encourage customers to provide a delivery address where someone will be available to accept the parcel at the time of delivery to avoid the inconvenience and additional costs associated with re-posting.
Returns are accepted within 14 days for change of mind and 30 days for faulty items.
To request a return, you can contact us at sales@accessmodels.co.uk or call us on 01636673116
Access Models offers exchange or refund for eligible returns, excluding faults due to misuse or wear and tear. Customers are responsible for return postage costs, except in cases of damage or fault. Refunds are issued in accordance with the returns policy, excluding opened packages unless they are faulty.
To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with its original packaging. You’ll also need the receipt or proof of purchase.
Please note that refunds will only cover the cost of the item(s) purchased and will not include any postage or shipping fees.
Damages and issues
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.
Refunds
We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method within 10 business days. Please remember it can take some time for your bank or credit card company to process and post the refund too.
If more than 15 business days have passed since we’ve approved your return, please contact us at sales@accessmodels.co.uk.