Dynam Tomcat Skyclaw 40 Amp Esc For 550/650 Class Multi-Rotor SKYCLAW-40A
£25.99
✅ Available within 7-10 days
🚚 Shipping from £4.99
SKU:
SKYCLAW-40A
Vendor:
Dynam
Dynam Tomcat Skyclaw 40 Amp Esc For 550/650 Class Multi-Rotor SKYCLAW-40A
Adopt high-frequency MCU (up to 50MHz) as the main control chip, the computing speed of the ESC is faster and the response speed of the throttle is dramatically improved.
Applying the synchronous rectifier technology, it can increase the ESC efficiency (significantly reduce the ESC temperature), improve the throttle linearity, and speed up the deceleration response of the motor.
The ESCs only have one programmable item (Timing), it is very simple to use. Users can set the program items only on PPM signal-receiving mode. The Skyclaw series ESCs only have one programmable item (Timing). Values of Timing: High and Middle. The default is Middle.
In PPM signal-receiving mode, the frequency of the throttle signal supported by the ESCs is up to 500Hz and compatible with various flight controllers.
The twisted-pair design of the throttle signal cable effectively reduces the crosstalk produced in signal transmission and makes the flight more stable. By using specialized power tube to driver the chip, the ESCs have high efficiency and strong reliability.
Start-up protection: If the motor fails to start within 2 seconds while pushing the throttle stick upward, the ESC will cut off the output power. You need to put the throttle stick to the lowest position again and then restart the motor. It happens in the following situations: poor connection or disconnection between the ESC and the motor, the propellers are blocked, etc.
Throttle signal loss protection: If the throttle signal is lost for over 0.25 second, the ESC will cut off the output immediately to avoid greater losses caused by the high-speed rotation of the propeller. The ESC will recover the output immediately after normal signals are received.
Suitable for 550/650 Class multi-rotors.
Tomcat Skyclaw Features:
- Twisted pair signal wire
- High frequency MCU
- Oneshot125 signal-receiving mode
- Synchronous rectifier technology
- Special drive circuit
Spec Check:
- Cont./Peak Current: 40A
- Burst Current (10s): 60A
- Input:2-6S LiPo
- BEC: No
- Size: 62 x 25 x 8.7
- Weight: 26g
CAUTION: When the Skyclaw series ESCs are applied to 250 or 300 multi-rotors, 1806 or 2204 size motors and 5 or 6 inches propellers are recommended to use. To avoid overload and burning the ESCs, do not use larger size propellers or motors.
Free delivery over £99
Shipping charges vary based on the order value and destination. UK standard shipping costs range from £4.99 to £7.99.
Additional surcharges for heavy items and non-mainland UK destinations, including specific regions like Northern Ireland, Isle of Man, Guernsey, and Jersey. We do not ship to PO Boxes and BFPO addresses.
Access Models offers efficient delivery services within the UK and overseas, aiming to dispatch orders within... Read More
Returns are accepted within 14 days for change of mind and 30 days for faulty items.
To request a return, you can contact us at sales@accessmodels.co.uk or call us on 01636673116
Access Models offers exchange or refund for eligible returns, excluding faults due to misuse or wear and tear. Customers are responsible for return postage costs, except in cases of damage or fault. Refunds are issued in accordance with the returns... Read More
Dynam Tomcat Skyclaw 40 Amp Esc For 550/650 Class Multi-Rotor SKYCLAW-40A
Adopt high-frequency MCU (up to 50MHz) as the main control chip, the computing speed of the ESC is faster and the response speed of the throttle is dramatically improved.
Applying the synchronous rectifier technology, it can increase the ESC efficiency (significantly reduce the ESC temperature), improve the throttle linearity, and speed up the deceleration response of the motor.
The ESCs only have one programmable item (Timing), it is very simple to use. Users can set the program items only on PPM signal-receiving mode. The Skyclaw series ESCs only have one programmable item (Timing). Values of Timing: High and Middle. The default is Middle.
In PPM signal-receiving mode, the frequency of the throttle signal supported by the ESCs is up to 500Hz and compatible with various flight controllers.
The twisted-pair design of the throttle signal cable effectively reduces the crosstalk produced in signal transmission and makes the flight more stable. By using specialized power tube to driver the chip, the ESCs have high efficiency and strong reliability.
Start-up protection: If the motor fails to start within 2 seconds while pushing the throttle stick upward, the ESC will cut off the output power. You need to put the throttle stick to the lowest position again and then restart the motor. It happens in the following situations: poor connection or disconnection between the ESC and the motor, the propellers are blocked, etc.
Throttle signal loss protection: If the throttle signal is lost for over 0.25 second, the ESC will cut off the output immediately to avoid greater losses caused by the high-speed rotation of the propeller. The ESC will recover the output immediately after normal signals are received.
Suitable for 550/650 Class multi-rotors.
Tomcat Skyclaw Features:
- Twisted pair signal wire
- High frequency MCU
- Oneshot125 signal-receiving mode
- Synchronous rectifier technology
- Special drive circuit
Spec Check:
- Cont./Peak Current: 40A
- Burst Current (10s): 60A
- Input:2-6S LiPo
- BEC: No
- Size: 62 x 25 x 8.7
- Weight: 26g
CAUTION: When the Skyclaw series ESCs are applied to 250 or 300 multi-rotors, 1806 or 2204 size motors and 5 or 6 inches propellers are recommended to use. To avoid overload and burning the ESCs, do not use larger size propellers or motors.
Free delivery over £99
Shipping charges vary based on the order value and destination. UK standard shipping costs range from £4.99 to £7.99.
Additional surcharges for heavy items and non-mainland UK destinations, including specific regions like Northern Ireland, Isle of Man, Guernsey, and Jersey. We do not ship to PO Boxes and BFPO addresses.
Access Models offers efficient delivery services within the UK and overseas, aiming to dispatch orders within 48 hours of receipt, contingent on payment confirmation. Standard UK deliveries are conducted via Royal Mail, typically arriving within 2-3 days, though customers are advised to allow up to 5 days. For expedited deliveries, the express service ensures next-day delivery for orders placed before 1pm, with specific provisions for orders placed over the weekend or on bank holidays.
Shipping charges vary based on the order value and destination. UK standard shipping costs range from £4.99 to £7.99, with additional surcharges for heavy items and non-mainland UK destinations, including specific regions like Northern Ireland, Isle of Man, Guernsey, and Jersey. We do not ship to PO Boxes and BFPO addresses.
For heavy, bulky, or restricted items such as large model kits and items containing hazardous materials, special shipping considerations apply. International shipping starts at £18, with varying costs and delivery times based on destination zones. Access Models does not ship to certain countries including Spain, USA, and Australia.
Customers may encounter customs fees on international orders, which are not included in our shipping costs and are the responsibility of the customer. In case of postal losses or damage, claims may take up to 30 days to process, and we require customer confirmation to initiate this process.
Returns are accepted within 14 days for change of mind and 30 days for faulty items, in line with the EU Distance Selling Directive. Access Models offers repair, exchange, or refund for eligible returns, excluding faults due to misuse or wear and tear. Customers are responsible for return postage costs, except in cases of damage or fault. Refunds are issued in accordance with the returns policy, excluding opened packages unless they are faulty.
Unattended Deliveries and Returns:
In the event that a customer is not available to receive their order upon any delivery attempts, and the item is consequently returned to us by the courier, it is the responsibility of the customer to cover the costs of re-posting the item.
Should your order be returned due to unavailability at the delivery address during any attempts made, we will contact you to confirm the address details and arrange for re-delivery. Please be advised that we will require payment of re-postage costs before the item is dispatched again. This fee will cover the costs associated with handling and shipping the item to you for another attempt.
We strongly encourage customers to provide a delivery address where someone will be available to accept the parcel at the time of delivery to avoid the inconvenience and additional costs associated with re-posting.
Returns are accepted within 14 days for change of mind and 30 days for faulty items.
To request a return, you can contact us at sales@accessmodels.co.uk or call us on 01636673116
Access Models offers exchange or refund for eligible returns, excluding faults due to misuse or wear and tear. Customers are responsible for return postage costs, except in cases of damage or fault. Refunds are issued in accordance with the returns policy, excluding opened packages unless they are faulty.
To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with its original packaging. You’ll also need the receipt or proof of purchase.
Damages and issues
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.
Refunds
We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method within 10 business days. Please remember it can take some time for your bank or credit card company to process and post the refund too.
If more than 15 business days have passed since we’ve approved your return, please contact us at sales@accessmodels.co.uk.