Atlantis Models 1:48 Russian Stalin Tank AMCA303
£25.99
✅ In Stock at Warehouse - Dispatched in 7-10 days
✅ Available for "Click and Collect" in 7-10 days
🚚 Delivery cost from £4.99
SKU:
AMCA303
Vendor:
Atlantis Models
Atlantis Models 1:48 Russian Stalin Tank AMCA303
FEATURES
- Elevating 122mm gun
- Flexible tank treads
- Traversing turret
- 12.7mm machine gun
- Opening hatches
- Box top artwork suitable for framing
- Made in the USA
- Aurora tooling
DETAILS
1/48 Scale. Features elevating 122mm gun, flexible tank treads, traversing turret, 12.7 MM machine gun, opening hatches, Moulded in Russian green.
In 1943 the Russians developed the famous T-34 tank which did much to help drive the Nazis from their homeland. The T-34 was heavily armoured and mounted a large caliber gun in a single 360-degree traverse turret. This tank set the pattern for future Russian tank design and strongly influenced foreign designs including the world-famous Panther Tank produced by Germany during World War II. The Panther copied much from the T-34 and the Germans developed these ideas into an even better fighting machine. With the introduction of the T-34, the large gun, heavy tank race was on. The Russians, utilising the experience gained with the T-34 design, came out with the KV-2, a 52 ton, 76mm gun tank which was quickly followed by the first of the Stalin Tank series, the JS-1. This new design was a 57 ton 122mm gun tank which first appeared in 1945 and was improved in the following years to produce the Joseph Stalin III.
The JS-III Tank incorporated two conspicuous departures in armour design that were entirely new in tanks. The first is a prow-shaped front hull, technically called compound obliquity. A shell striking the front of the tank must, because of the sharply angled plates, penetrate a thicker section of armour than would be encountered in a flat vertical plate. The second radical feature is the turret, which is the first turtle-back design on a standard tank. Because it is cast in steel with varying wall thicknesses, this type of turret affords greater protection against high velocity anti-tank shells at a substantial savings in weight, while still being sufficiently protected on the top surface.
The JS-III mounts a high-velocity 122mm cannon which fires a 50 lb. shell. Because of the size of these shells, not many can be carried in the closely-packed turret. Another disadvantage of this gun is that the shells are hand-fed into the breach. A slower rate of fire is affected by this, and this is critical when the first few rounds of a tank battle count. The only other armament on the JS-III Tank is the 12.7mm DSHK machine gun mounted on top of the turret in front of the Commander's hatch. Periscopes are provided for both driving and observation to cut down the number of openings into the interior, and all steering instructions are radioed from the Commander's hatch.
The JS-III is powered by a 60-degree V-type 12 cylinder, liquid-cooled diesel engine which gives the tank a top speed of 20 miles per hour. The tracks are large and widely spaced, exerting 11.6 pounds per square inch making it possible for the JS-III to cross over soft ground that would bog down even lighter, smaller tanks.
ideal for model kits enthusiast.Free delivery over £99
Shipping charges vary based on the order value and destination. UK standard shipping costs range from £4.99 to £7.99.
Additional surcharges for heavy items and non-mainland UK destinations, including specific regions like Northern Ireland, Isle of Man, Guernsey, and Jersey. We do not ship to PO Boxes and BFPO addresses.
Access Models offers efficient delivery services within the UK and overseas, aiming to dispatch orders within... Read More
Returns are accepted within 14 days for change of mind and 30 days for faulty items.
To request a return, you can contact us at sales@accessmodels.co.uk or call us on 01636673116
Access Models offers exchange or refund for eligible returns, excluding faults due to misuse or wear and tear. Customers are responsible for return postage costs, except in cases of damage or fault. Refunds are issued in accordance with the returns... Read More
Atlantis Models 1:48 Russian Stalin Tank AMCA303
FEATURES
- Elevating 122mm gun
- Flexible tank treads
- Traversing turret
- 12.7mm machine gun
- Opening hatches
- Box top artwork suitable for framing
- Made in the USA
- Aurora tooling
DETAILS
1/48 Scale. Features elevating 122mm gun, flexible tank treads, traversing turret, 12.7 MM machine gun, opening hatches, Moulded in Russian green.
In 1943 the Russians developed the famous T-34 tank which did much to help drive the Nazis from their homeland. The T-34 was heavily armoured and mounted a large caliber gun in a single 360-degree traverse turret. This tank set the pattern for future Russian tank design and strongly influenced foreign designs including the world-famous Panther Tank produced by Germany during World War II. The Panther copied much from the T-34 and the Germans developed these ideas into an even better fighting machine. With the introduction of the T-34, the large gun, heavy tank race was on. The Russians, utilising the experience gained with the T-34 design, came out with the KV-2, a 52 ton, 76mm gun tank which was quickly followed by the first of the Stalin Tank series, the JS-1. This new design was a 57 ton 122mm gun tank which first appeared in 1945 and was improved in the following years to produce the Joseph Stalin III.
The JS-III Tank incorporated two conspicuous departures in armour design that were entirely new in tanks. The first is a prow-shaped front hull, technically called compound obliquity. A shell striking the front of the tank must, because of the sharply angled plates, penetrate a thicker section of armour than would be encountered in a flat vertical plate. The second radical feature is the turret, which is the first turtle-back design on a standard tank. Because it is cast in steel with varying wall thicknesses, this type of turret affords greater protection against high velocity anti-tank shells at a substantial savings in weight, while still being sufficiently protected on the top surface.
The JS-III mounts a high-velocity 122mm cannon which fires a 50 lb. shell. Because of the size of these shells, not many can be carried in the closely-packed turret. Another disadvantage of this gun is that the shells are hand-fed into the breach. A slower rate of fire is affected by this, and this is critical when the first few rounds of a tank battle count. The only other armament on the JS-III Tank is the 12.7mm DSHK machine gun mounted on top of the turret in front of the Commander's hatch. Periscopes are provided for both driving and observation to cut down the number of openings into the interior, and all steering instructions are radioed from the Commander's hatch.
The JS-III is powered by a 60-degree V-type 12 cylinder, liquid-cooled diesel engine which gives the tank a top speed of 20 miles per hour. The tracks are large and widely spaced, exerting 11.6 pounds per square inch making it possible for the JS-III to cross over soft ground that would bog down even lighter, smaller tanks.
ideal for model kits enthusiast.Free delivery over £99
Shipping charges vary based on the order value and destination. UK standard shipping costs range from £4.99 to £7.99.
Additional surcharges for heavy items and non-mainland UK destinations, including specific regions like Northern Ireland, Isle of Man, Guernsey, and Jersey. We do not ship to PO Boxes and BFPO addresses.
Access Models offers efficient delivery services within the UK and overseas, aiming to dispatch orders within 48 hours of receipt, contingent on payment confirmation. Standard UK deliveries are conducted via Royal Mail, typically arriving within 2-3 days, though customers are advised to allow up to 5 days. For expedited deliveries, the express service ensures next-day delivery for orders placed before 1pm, with specific provisions for orders placed over the weekend or on bank holidays.
Shipping charges vary based on the order value and destination. UK standard shipping costs range from £4.99 to £7.99, with additional surcharges for heavy items and non-mainland UK destinations, including specific regions like Northern Ireland, Isle of Man, Guernsey, and Jersey. We do not ship to PO Boxes and BFPO addresses.
For heavy, bulky, or restricted items such as large model kits and items containing hazardous materials, special shipping considerations apply. International shipping starts at £18, with varying costs and delivery times based on destination zones. Access Models does not ship to certain countries including Spain, USA, and Australia.
Customers may encounter customs fees on international orders, which are not included in our shipping costs and are the responsibility of the customer. In case of postal losses or damage, claims may take up to 30 days to process, and we require customer confirmation to initiate this process.
Returns are accepted within 14 days for change of mind and 30 days for faulty items, in line with the EU Distance Selling Directive. Access Models offers repair, exchange, or refund for eligible returns, excluding faults due to misuse or wear and tear. Customers are responsible for return postage costs, except in cases of damage or fault. Refunds are issued in accordance with the returns policy, excluding opened packages unless they are faulty.
Unattended Deliveries and Returns:
In the event that a customer is not available to receive their order upon any delivery attempts, and the item is consequently returned to us by the courier, it is the responsibility of the customer to cover the costs of re-posting the item.
Should your order be returned due to unavailability at the delivery address during any attempts made, we will contact you to confirm the address details and arrange for re-delivery. Please be advised that we will require payment of re-postage costs before the item is dispatched again. This fee will cover the costs associated with handling and shipping the item to you for another attempt.
We strongly encourage customers to provide a delivery address where someone will be available to accept the parcel at the time of delivery to avoid the inconvenience and additional costs associated with re-posting.
Returns are accepted within 14 days for change of mind and 30 days for faulty items.
To request a return, you can contact us at sales@accessmodels.co.uk or call us on 01636673116
Access Models offers exchange or refund for eligible returns, excluding faults due to misuse or wear and tear. Customers are responsible for return postage costs, except in cases of damage or fault. Refunds are issued in accordance with the returns policy, excluding opened packages unless they are faulty.
To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with its original packaging. You’ll also need the receipt or proof of purchase.
Please note that refunds will only cover the cost of the item(s) purchased and will not include any postage or shipping fees.
Damages and issues
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.
Refunds
We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method within 10 business days. Please remember it can take some time for your bank or credit card company to process and post the refund too.
If more than 15 business days have passed since we’ve approved your return, please contact us at sales@accessmodels.co.uk.